![Logo para Portacargador Alpha-Xi Logo para Portacargador Alpha-Xi](https://shootersbest.com/45141-large_default/alpha-xi-pouch-inlay.jpg)
![Logo para Portacargador Alpha-Xi Logo para Portacargador Alpha-Xi](https://shootersbest.com/45141-large_default/alpha-xi-pouch-inlay.jpg)
This is a complete set of Alpha-Xi Pouch Inlays in the color of your choice.
This is a complete set of Alpha-Xi Pouch Inlays in the color of your choice.
These inlays will fit into all the various pockets on the Alpha Xi pouch body. check the fit first for all pieces before removing the 3M tape from the back. Most pockets are unique and require their specific piece. Do not glue an insert in the pocket you plan to attach the Ball Joint to.
Please note that these inlays have a protective transparent film on their front and 3m adhesive tape cover on their back. Both should be peeled off before installation..
In order to install the inlays do the following:
Should you wish you remove the inlays after installation, you can do so using the small holes drilled through the pouch body. In order to access these holes, you will need to remove all plastic spacers first. Then, using a sharp tool (like a small hex key) you can push on the inside of the inlay until it comes loose in the corner. Then, gently work it out of its pocket. Note that the inlay may break when removed.