REAL AVID Bore-Max™ Speed Brushes™
9,84 €
TTC
Twice the bristle density of standard brushes for maximum scrubbing power. Stiff, nickel plated phosphor bronze bristles reduce chemical breakdown in the bore and extend the life of the brush.
71-000133
The Bore-Max Speed Brush is a component of the Bore-Max Speed Clean System for faster and easier bore cleaning. Carbon build-up not only affects performance and accuracy, but also causes degradation of the bore. Carbon build-up also insulates the copper fouling in the bore making it difficult to dissolve and remove with bore solvent. Using a bore brush to remove this carbon build-up is the best way to tackle the job. In order to achieve maximum effectiveness, there needs to be an optimal balance between bristle density and bristle flexibility. Having too few bristles is a waste of time and too many won’t provide enough flexibility to navigate the lands and grooves of the bore. The bristle configuration of the Bore-Max Speed Brush provides maximum scrubbing density removing more carbon with each pass and getting maximum results faster.
CALIBER:
• .22 CAL
• .223 CAL/5,6 mm
• 338 Lapua Magnum
• .30 CAL/7,62 mm
• .380 CAL/9 mm .38 SPC .357 CAL
• .40S&W
• .45 CAL
• 12 ga
• 20 ga
71-000133
Twice the bristle density of standard brushes for maximum scrubbing power. Stiff, nickel plated phosphor bronze bristles reduce chemical breakdown in the bore and extend the life of the brush.