DPM MRS for Walther PDP 4.5″ & 5″ 18 Settings
121,92 €
TTC
The DPM Mechanical Recoil Reduction System is a direct replacement for the stock recoil rod and does not change the configuration of the pistol. As always, DPM products are designed and developed with user’s safety as a priority. Exceptional manufacturing and engineering using high-end materials.
49-117017
DPM MRS for Walther PDP 4.5″ & 5″ 18 settings
This DPM System works with 6 different buffer recoil springs which each one offers different spring force (forces are listed at the end of the description).
The System includes 3 external springs, 6 buffer recoil springs and 1 safety pin.
The longer spring (more coils) is stronger and has a heavier pound rating than the shorter spring.
Forces:
• Soft 0.7mm
• Short = 8.0 kg/ 17 lbs
• Medium = 9 kg/ 20 lbs
• Long = 10 kg/ 22 lbs
• Hard 0.8mm
• Short = 9.0 kg/ 20 lbs
• Medium = 10.5 kg/ 23 lbs
• Long = 11.5 kg/ 26 lbs
• Suggestion: For low power (very soft ammunition) its not essential to use any of the Buffer Springs.
• In that case the System in full open position offers 7 kgs/ 15 lbs total force.
Feel free to try any possible combination of the external and buffer springs to fine tune the pistol function depending the power of the ammunition is used and according to your personal standards.
Overall Advantages:
• Faster follow up shots
• Improved firing speed
• Slide and Frame Protection
• Elimination of jams
• Significant recoil reduction
• Better double-tap concentration
• Better control and greater accuracy
DPM Code: 1000234
49-117017
The DPM Mechanical Recoil Reduction System is a direct replacement for the stock recoil rod and does not change the configuration of the pistol. As always, DPM products are designed and developed with user’s safety as a priority. Exceptional manufacturing and engineering using high-end materials.